How to Find Out the Year of Your Ithaca Model 49 Saddle Gun
The Ithaca Model 49 was a single-shot lever-action rifle that was produced from 1961 to 1979 by the Ithaca Gun Company. It was designed as a low-cost firearm for young shooters and hunters, and was marketed by Sears Roebuck under the name \"Roy Rogers\". The rifle had a distinctive saddle ring on the receiver and a brass-colored metal buttplate. It was chambered in .22 Short, Long, or Long Rifle cartridges.
If you own an Ithaca Model 49 and want to find out the year of its manufacture, you might encounter some difficulties. Unlike other Ithaca guns, the Model 49 did not have a serial number scheme that corresponded to the production date. The serial numbers were assigned randomly and did not follow any chronological order. Therefore, you cannot use the serial number alone to determine the age of your rifle.
However, there are some clues that can help you narrow down the possible year range of your Ithaca Model 49. Here are some steps you can follow to do a serial number lookup for your rifle:
Check the wood type of your stock. The early models of the Ithaca Model 49 used walnut wood for the stock, while the later models switched to elm wood. The walnut wood has a darker color and a finer grain than the elm wood. If your rifle has a walnut stock, it was probably made before 1968. If it has an elm stock, it was probably made after 1968.
Check the receiver material of your rifle. The receiver is the part that holds the barrel and the action of the rifle. The early models of the Ithaca Model 49 used steel for the receiver, while the later models used aluminum. The steel receiver has a blued finish and is heavier than the aluminum receiver. The aluminum receiver has a silver-gray finish and is lighter than the steel receiver. If your rifle has a steel receiver, it was probably made before 1973. If it has an aluminum receiver, it was probably made after 1973.
Check the barrel length of your rifle. The original models of the Ithaca Model 49 had a barrel length of 18 inches, while some later models had a barrel length of 20 inches. The longer barrel was introduced to improve the accuracy and velocity of the rifle. If your rifle has an 18-inch barrel, it was probably made before 1975. If it has a 20-inch barrel, it was probably made after 1975.
Check the markings on your rifle. The early models of the Ithaca Model 49 had a simple roll stamp on the left side of the barrel that read \"Ithaca Gun Co., Inc., Ithaca N.Y.\". The later models had a more elaborate roll stamp on both sides of the barrel that read \"Ithaca Gun Co., Inc., Ithaca N.Y., Made in U.S.A.\" and \"Model-49 Single Shot Lever Action\". Some models also had a Sears Roebuck logo on the right side of the receiver that read \"Sears Roebuck & Co., Model No. 340-530430\". If your rifle has only one roll stamp on the barrel, it was probably made before 1976. If it has two roll stamps on the barrel and/or a Sears logo on the receiver, it was probably made after 1976.
By following these steps, you can get an approximate idea of when your Ithaca Model 49 was made. However, keep in mind that these are not definitive indicators and there might be some exceptions or variations among different rifles. The best way to verify the exact year of your rifle is to contact the Ithaca Gun Company directly and provide them with your serial number. They might be able to give you more information about your specific rifle and its history.
The Ithaca Model 49 is a classic American firearm that has been enjoyed by generations of shooters and collectors. By doing a serial number lookup for your rifle, you can learn more about its origin and value. Whether you use it for hunting, plinking, or display, you can appreciate its 0efd9a6b88